Product category
  • Disposable doctor cap

  • Mesh Molded Cup Disposable Respirator With Exhalation Valve

  • Wood pulp spunlace surgical gown

  • Cupped N95 respirator with valve

  • Cupped N95 respirator dust mask

  • Flat Flod N95 Disposable Respirator With Valve

  • 3 ply surgical face mask

  • 3 ply surgical procedure face mask

  • 3 ply green surgical face mask

  • 3 ply medical face mask

  • Plastic restaurant bib

  • Disposable surgical cap

  • Disposable blue bouffant cap

  • Disposable green bouffant cap

  • Disposable bouffant cap

  • Disposable mob cap for salons

  • Hot selling red mob cap

  • Hot selling disposable blue mob cap

  • Hot selling disposable mob cap

  • Disposable white mob cap

  • Disposable green mob cap

  • SMS coverall

  • Yellow SMS isolation gown

  • Isolation gown with OEM design

  • Blue SMS surgical gown

  • Disposable SMS surgical gown

  • Disposable surgical gown

  • Yellow microporous coverall

  • Orange microporous coverall

  • Over-taped microporous coverall

  • Microporous coverall

  • PP coverall


N95 respirator fit test


Positive Pressure Fit Check

The respirator seal must be checked before each use. To perform the fit check, place both hands completely over the respirator, being careful not to disturb the position. Exhale sharply.


If air leaks around your nose, adjust the nosepiece. If air leaks at respirator edges, adjust the straps back along the sides of your head. Perform the fit check again if an adjustment is made. If you cannot achieve a proper fit do not enter area requiring respirator use.

Note: Do not use with beards or other facial hair or other conditions that prevent a good seal between the face and the face seal of the respirator.